Q: What settings should be made on the Victron inverter in order to work with the Solar MD battery?
top of page
Forum: Forum
To test this feature, visit your live site.
3 Comments
bottom of page
top of page
Forum: Forum
Featured stories
bottom of page
To set up your Victron inverter to work with the Solar MD battery, follow these steps:
Battery Type: Set the battery type to "Lithium" in the inverter settings.
Battery Voltage: Match the nominal voltage of the Solar MD battery.
Charge Parameters: Input the charge parameters provided by Solar MD, including charge voltage and current limits.
Communication: Ensure the Victron inverter is correctly communicating with the Solar MD battery using the appropriate communication cable and protocol.
Safety Settings: Enable relevant safety features such as over-voltage and under-voltage protection.
Refer to the manuals of both the Victron inverter and Solar MD battery for specific details.